Heyco-Flex™ Quick Twist Conduit Fittings 90* Sweep, Snap-In, and NPT Hubs 

The Heyco-Flex™ Quick Twist Conduit Fittings are a one-piece solution with smooth internal surfaces provides for easier wire routing, protection, and installation. With easy permanent assembly, the installer twists the tubing over the connector ferrule while unique locking fingers accommodate various panel thicknesses. Snap-in Fittings are UL recognized for use with Heyco-Flex II Tubing. The all nylon construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification and testing.) For use in dry location only. Finishing collars available to neaten rough cut tubing ends.

Snap-in Hubs features:

• Snap-in Fittings are UL recognized for use with Heyco-Flex II Tubing.
• Suitable for dry location only.
• For Panels from .062″ (1,6 mm) to .125″ (3,2 mm) Thick.

NPT Hubs features:

• NPT threaded fittings are UL approved for use with Heyco-Flex™ I & II Conduit and Tubing.
• If using a tapped hole, Teflon® tape is needed on the threads of the connector, for all other applications an O-ring and Locknut are needed to attain liquid tight.
• Locknuts not included.